- Exterior Hand Rails middot; Outdoor
- The stairs have oak treads and
- Exterior Spiral Stairs
- stair railings
- Stair Railing
- Entries; outdoor handrail kits
- Easy Indoor Outdoor
- There are hot-tub, outdoor
- Sydney Wide Carpenters outdoor
- To construct a handrail
- outdoor wood Ideas wooden
- with metal handrails
- +iron+railings+outdoor
- Steel Outdoor Handrail
- outdoor furniture, steps
- handrails prim Section,
- iron railings or outdoor
- Deck Stair Railing
- Childrens Outdoor
dmbmar
Apr 12, 06:14 PM
I've downloaded the update - how do I get ical and Outlook to sync?
blenderxgrid
Oct 2, 05:31 PM
I've been working in my spare time on creating a distrubted computer system based on Xgrid to render Blender 3D projects. It works well on my local LAN, but in the last week I've started to expand it to allow others to connect. So far the Grid has 10.6 Ghz registered to it via internet users.
Blender 3D is Opensource and supported on many platforms including Solaris, FreeBSD, Linux, OSX, and Windows. The major draw back is thus far only macintosh users have been able to connect and process jobs.
I've tried using windows boxes connecting through an opensource JAVA client and then do connect to the grid and accept tasks, but output an error stating "Blender could not be found at current location" or something to that effect. Basically I figure that blender has to be in the same place on all the machines.
I haven't gotten any Linux/BSD users to try the system yet, but there were some sucesses on local grids with Linux machines connenting and rendering works.
Help and advice are sorely welcome. You can check out www.blenderxgrid.com for more information.
So far, I've gotten users to connect to the grid, but the controller is not distrubting out tasks to those agents. They are just shown as "unavailable". And am advancing beyond my technical expertise here, so help and ideas will be welcome.
Blender 3D is Opensource and supported on many platforms including Solaris, FreeBSD, Linux, OSX, and Windows. The major draw back is thus far only macintosh users have been able to connect and process jobs.
I've tried using windows boxes connecting through an opensource JAVA client and then do connect to the grid and accept tasks, but output an error stating "Blender could not be found at current location" or something to that effect. Basically I figure that blender has to be in the same place on all the machines.
I haven't gotten any Linux/BSD users to try the system yet, but there were some sucesses on local grids with Linux machines connenting and rendering works.
Help and advice are sorely welcome. You can check out www.blenderxgrid.com for more information.
So far, I've gotten users to connect to the grid, but the controller is not distrubting out tasks to those agents. They are just shown as "unavailable". And am advancing beyond my technical expertise here, so help and ideas will be welcome.
kenpina
Apr 30, 01:56 PM
Purchased: Aug '07
Model No: A1186
EMC No: 2138
Mac Pro/3.0_8CX/4x1/2x7300GT/500/2xSD/AP/BT
Logic board:
Part number: 630-7951
Serial Number: J5*****X7QB
Upgrades:
Added: 8gb Kingston memory (total 12gb)
Added: 3x1tb drives (total 3.5tb)
Couple weeks back, system blinked off. The machines powers on, but there's no chime and the system doesn't boot at all. Done the SMC reset, reseated RAM, drives, video cards etc. Suspected the logic board.
Troubleshooting (from Frys, Apple authorized) confirms it's the logic board.
Now, going through the process of pulling the old board to trade in for a replacement "X7Q" board. Probably this one:
http://www.galaxyhp.com/Mac-Pro-Early-2007-8-core-Logic-Board-ver2-new-wexchange_p_177.html
I got the machine disassembled but I am unable to remove the heat sinks/CPUs. The 4 captive screws loosen, even took them all the way out of the machine, but the sinks seem to be stuck. It doesn't just lift out as most of the online info I've found indicates that it should.
Unsure of how hard to pull on this thing. It wobbles very slightly, but feels firmly stuck on...enough that the board will flex if I pull it any harder.
More reading makes me think it might be the thermal paste is just really sticking? This is really stuck though...almost as though there's another screw I can't see. I thought if I pulled hard enough the CPU might come out along with the sink.
Also I ran across an article (after the fact) that states the order of screw removal from the heat sinks needs to be in a specific crossing pattern. Can't imagine how that matters.
Of course, I paid through the nose for this machine back in late '07. Bought Apple Care even. All long since expired...now that I need it. Getting desperate. This machine is a workhorse and I see no value in replacing it if I can fix it for 700 to 800 bucks.
Any one have ideas?
Model No: A1186
EMC No: 2138
Mac Pro/3.0_8CX/4x1/2x7300GT/500/2xSD/AP/BT
Logic board:
Part number: 630-7951
Serial Number: J5*****X7QB
Upgrades:
Added: 8gb Kingston memory (total 12gb)
Added: 3x1tb drives (total 3.5tb)
Couple weeks back, system blinked off. The machines powers on, but there's no chime and the system doesn't boot at all. Done the SMC reset, reseated RAM, drives, video cards etc. Suspected the logic board.
Troubleshooting (from Frys, Apple authorized) confirms it's the logic board.
Now, going through the process of pulling the old board to trade in for a replacement "X7Q" board. Probably this one:
http://www.galaxyhp.com/Mac-Pro-Early-2007-8-core-Logic-Board-ver2-new-wexchange_p_177.html
I got the machine disassembled but I am unable to remove the heat sinks/CPUs. The 4 captive screws loosen, even took them all the way out of the machine, but the sinks seem to be stuck. It doesn't just lift out as most of the online info I've found indicates that it should.
Unsure of how hard to pull on this thing. It wobbles very slightly, but feels firmly stuck on...enough that the board will flex if I pull it any harder.
More reading makes me think it might be the thermal paste is just really sticking? This is really stuck though...almost as though there's another screw I can't see. I thought if I pulled hard enough the CPU might come out along with the sink.
Also I ran across an article (after the fact) that states the order of screw removal from the heat sinks needs to be in a specific crossing pattern. Can't imagine how that matters.
Of course, I paid through the nose for this machine back in late '07. Bought Apple Care even. All long since expired...now that I need it. Getting desperate. This machine is a workhorse and I see no value in replacing it if I can fix it for 700 to 800 bucks.
Any one have ideas?
fahadqureshi
Apr 19, 10:26 AM
anyone have info on that "carbon design decal" case for ipad2 at the end.
w0by
Feb 26, 08:36 AM
I'm not sure how you have your ipod set up, but you need to turn off one touch purchasing in iTunes I believe..this will make sure you type in a password to buy/install apps. I'm the only one that uses my ipod/iphone and I still have that turned on just in case it goes missing and someone decides to buy everything in sight.
It isn't all tweens that are doing this. My 3-year old son was playing with my iPod Touch. I installed the free app Touch Zoo, thinking it was something I could keep him occupied with.
Well, within the next 15 minutes he bought 10 bags of stars - something I didn't know about until I received the $10 invoice from Apple the next day. He didn't know what he was doing - he was just randomly pressing buttons.
Now, to be honest, I had a feeling this might happen someday (the boy seems to get into EVERYTHING), and $10 is a small price to pay for a lesson learned for me. So I disabled the ability to install apps on that iPod Touch. Just for good measure, he's been banned from iPod Touch use unless it's a circumstance when he's fidgety and I need to keep him busy (like at the grocery store or a restaurant). Thank goodness he didn't purchase 100 bags of stars.
Still, it would be nice to have an option (in the restrictions menu) to require the password to be entered every time an app is purchased. That would make my life easier.
While we're at it, the boy almost deleted some videos of himself from my iPhone. I would have been upset, because they were videos from when he was a baby. Can we get another option in the restrictions menu that prevents photos from being deleted?
It isn't all tweens that are doing this. My 3-year old son was playing with my iPod Touch. I installed the free app Touch Zoo, thinking it was something I could keep him occupied with.
Well, within the next 15 minutes he bought 10 bags of stars - something I didn't know about until I received the $10 invoice from Apple the next day. He didn't know what he was doing - he was just randomly pressing buttons.
Now, to be honest, I had a feeling this might happen someday (the boy seems to get into EVERYTHING), and $10 is a small price to pay for a lesson learned for me. So I disabled the ability to install apps on that iPod Touch. Just for good measure, he's been banned from iPod Touch use unless it's a circumstance when he's fidgety and I need to keep him busy (like at the grocery store or a restaurant). Thank goodness he didn't purchase 100 bags of stars.
Still, it would be nice to have an option (in the restrictions menu) to require the password to be entered every time an app is purchased. That would make my life easier.
While we're at it, the boy almost deleted some videos of himself from my iPhone. I would have been upset, because they were videos from when he was a baby. Can we get another option in the restrictions menu that prevents photos from being deleted?
Chrispy
Jun 5, 09:21 PM
I was playing with it and what you are putting the team number where you put your user number. In that same field you need to enter: 140721 this is your number. If you enter that number it should come up with your score. :)
Good to see you are getting in too it!
Thanks! That explains it :) I am starting to enjoy this :D
Good to see you are getting in too it!
Thanks! That explains it :) I am starting to enjoy this :D
ct2k7
May 2, 08:33 PM
Exactly what have they said that they've taken back?
The woman killed in the incident turned out not to be bin Laden's wife.
The woman killed in the incident turned out not to be bin Laden's wife.
thatisme
Mar 29, 06:29 AM
I didn't say on different cameras. I said different lenses on the same, crop, camera.
Look. I own a 7D. I own an EF-s 17-85mm IS USM. I own a EF 50mm prime. I know that if I set the zoom to 50mm and take the same shot as with the prime exact same field of view. EF-s lenses are not corrected for the crop in the way you are saying they are.
I'll say it again. You are incorrect.
See this exerpt from the-digital-picture.com: read the underlined section carefully.
What affect does the FOVCF have on lenses? None - physically. The lenses are the same and retain all of their same physical attributes. But, there are some differences in how these lenses are used that should be mentioned ...
*
First, most lenses produce the highest quality image from near the center of their image circles. Distortion, softness (opposite of sharpness), vignetting ... These issues often show up in the outside portion of the image circle. Since the FOVCF DSLRs utilize only the center portion of a Canon EF Lens, they often avoid a lens' weaknesses. I say "Canon EF Lens" because Canon EF-S Lenses are made specifically for the 1.6x FOVCF DSLR bodies (but still require the same FOVCF to be applied as the standard Canon EF Lenses to get the equivalent focal length comparison). EF Lens hoods are designed for full-frame bodies.
Look. I own a 7D. I own an EF-s 17-85mm IS USM. I own a EF 50mm prime. I know that if I set the zoom to 50mm and take the same shot as with the prime exact same field of view. EF-s lenses are not corrected for the crop in the way you are saying they are.
I'll say it again. You are incorrect.
See this exerpt from the-digital-picture.com: read the underlined section carefully.
What affect does the FOVCF have on lenses? None - physically. The lenses are the same and retain all of their same physical attributes. But, there are some differences in how these lenses are used that should be mentioned ...
*
First, most lenses produce the highest quality image from near the center of their image circles. Distortion, softness (opposite of sharpness), vignetting ... These issues often show up in the outside portion of the image circle. Since the FOVCF DSLRs utilize only the center portion of a Canon EF Lens, they often avoid a lens' weaknesses. I say "Canon EF Lens" because Canon EF-S Lenses are made specifically for the 1.6x FOVCF DSLR bodies (but still require the same FOVCF to be applied as the standard Canon EF Lenses to get the equivalent focal length comparison). EF Lens hoods are designed for full-frame bodies.
tktaylor1
Apr 18, 01:43 PM
How much is an imac g3 (purple) worth. It has everything just like the day he bought it down to the styrofoam? He has the manuals, box, keyboard and mouse, styrofoam and whatever else comes in the box.
BrianKonarsMac
Mar 23, 04:14 PM
Major General Nick Justice. Awesome.
roadbloc
Apr 23, 03:54 AM
Are you sure you're trying your best? :D
Strangely enough, I'm doing a lot better than I was when I attended college. Having my daughter totally shook my life up.
Strangely enough, I'm doing a lot better than I was when I attended college. Having my daughter totally shook my life up.
cantthinkofone
Sep 27, 09:00 AM
I hope so, 10.4.7 is still the prime suspect for breaking my Firewire audio interface.
im not to fond of 10.4.7 either. i think 10.3.7 was when my G5 crashed and i had to re-install OS X :eek: when 10.5.7 rolls around, i think ill skip it.
im not to fond of 10.4.7 either. i think 10.3.7 was when my G5 crashed and i had to re-install OS X :eek: when 10.5.7 rolls around, i think ill skip it.
CorvusCamenarum
Apr 13, 01:34 AM
Ethnicity doesn't say anything other than the color of the persons skin. However, intelligence and stuff are things that actually can affect wether you are qualified or not. Two quite different things, if you ask me.
Except race has been shown to have an effect on intelligence. Ashkenazi Jews are about 1SD above whites, on average (average IQ 100, SD = 15). Blacks typically fare about 1SD lower than whites.
You should start with The Bell Curve: Intelligence and Class Structure in American Life (http://www.amazon.com/Bell-Curve-Intelligence-Structure-Paperbacks/dp/0684824299/ref=sr_1_1?s=books&ie=UTF8&qid=1302676401&sr=1-1). The authors explain it far better than I could.
Except race has been shown to have an effect on intelligence. Ashkenazi Jews are about 1SD above whites, on average (average IQ 100, SD = 15). Blacks typically fare about 1SD lower than whites.
You should start with The Bell Curve: Intelligence and Class Structure in American Life (http://www.amazon.com/Bell-Curve-Intelligence-Structure-Paperbacks/dp/0684824299/ref=sr_1_1?s=books&ie=UTF8&qid=1302676401&sr=1-1). The authors explain it far better than I could.
fourthtunz
Nov 4, 04:31 PM
Wow this is big! I'm not sure but hasn't it been like forever since Mac had 5% marketshare? Over 5% must put them in the top 5 pc makers? Maybe top 3? This is already huge growth, if they get to 10% or more look out!
The jerks who make viruses for windows will take the time to make them for Mac which would suck:mad:
Great time for us Mac owners:D
daniel
The jerks who make viruses for windows will take the time to make them for Mac which would suck:mad:
Great time for us Mac owners:D
daniel
Frosties
Nov 6, 06:10 AM
The sample I see here shows a way to make a phone's games or videos interact with toys.
You already have a standard for this, connecting any media device in a network. Your phone, your camera, media device to your tv, game console, internet and the cloud etc. Microsoft and almost every leading manufacturer is already shipping and using devices or soon to release with this standard. Apple is just trying to not follow standard and over complicate for us users. Bottom line: This is not a good idea. It is inventing something that is already out as a standard in the industry.
You already have a standard for this, connecting any media device in a network. Your phone, your camera, media device to your tv, game console, internet and the cloud etc. Microsoft and almost every leading manufacturer is already shipping and using devices or soon to release with this standard. Apple is just trying to not follow standard and over complicate for us users. Bottom line: This is not a good idea. It is inventing something that is already out as a standard in the industry.
maclaptop
May 6, 10:30 PM
Based on Apple's vascilating attitude over the last year, I'm taking a wait and see position.
I'm very happy to witness their success, yet it's too bad they've chosen to dampen what should be a great celebration, by acting as though they've got to go on the attack with law suits.
In the last year they've launched more suits than any other company in the industry.
Acting insecure does not become them.
I'm very happy to witness their success, yet it's too bad they've chosen to dampen what should be a great celebration, by acting as though they've got to go on the attack with law suits.
In the last year they've launched more suits than any other company in the industry.
Acting insecure does not become them.
Dreadnought
Jun 1, 04:54 PM
It works fine with glencox. Very strange, but in a couple of days Issmit should be passing me, so if it is something the widget it should happen again (at least with my widget). I'll let you know.
powers74
Jun 10, 12:34 PM
That'd be great!
Flying Llama
Sep 16, 12:55 AM
You don't need to worry a bit...
except for the anesthesia to wear off right in the middle! :eek:
llama ;)
except for the anesthesia to wear off right in the middle! :eek:
llama ;)
MotleyPete
Dec 21, 06:37 AM
It's only been a bit of fun, but the homeless charity Shelter have received a large slice of cash in the process (http://www.justgiving.com/ratm4xmas) and are due to get more from RATM themselves.
This makes it all worthwhile in my opinion. A merry xmas indeed.
This makes it all worthwhile in my opinion. A merry xmas indeed.
Gem�tlichkeit
Nov 17, 07:26 PM
Baller, $280 for that though? And you gotta do all the work yourself? Weak.
I'm sure apple is pissed because he is helping delay the white version by buying all the cases.
There wont be a white iphone 4
I'm sure apple is pissed because he is helping delay the white version by buying all the cases.
There wont be a white iphone 4
lmalave
Nov 2, 10:04 PM
So many of the switchers are college kids. A few
months ago they had an article about how the
market share in college is really falling more toward
mac, more than ever before. Apple is getting them
young, and that will pay off in the long run. I got
my first Mac when I started college and now that
I finished, I got a new one. The new laptops have
made a huge dent in this age group, so that is what
a lot of this whole market share increase is caused by.
Harvard and Princeton have both recently reported that 50% of sales at their campus computer stores are Macs.
months ago they had an article about how the
market share in college is really falling more toward
mac, more than ever before. Apple is getting them
young, and that will pay off in the long run. I got
my first Mac when I started college and now that
I finished, I got a new one. The new laptops have
made a huge dent in this age group, so that is what
a lot of this whole market share increase is caused by.
Harvard and Princeton have both recently reported that 50% of sales at their campus computer stores are Macs.
rovex
Mar 28, 10:38 AM
WWDC and E3 in the same week. OMG.
We can feast our eyes on the Sony NGP whilst Apple have nothing new to show in terms of hardware! :D
We can feast our eyes on the Sony NGP whilst Apple have nothing new to show in terms of hardware! :D
Porco
Mar 26, 03:27 PM
So Steve said "Let's go discuss this somewhere more private"?
Presumably Eric replied with "well maybe if you don't want people to know what we're doing, maybe we shouldn't be doing it!". :p
Presumably Eric replied with "well maybe if you don't want people to know what we're doing, maybe we shouldn't be doing it!". :p
Source URL: http://lifestyleartsblogs.blogspot.com/2011/05/handrails-for-outdoor-steps.html
Visit Lifestyle Arts for daily updated images of art collection
